1.TYF-01型立式复合墙板生产线1.TYF-01 type vertical EPS cement wall panel production line1.设备性能；TTF-01型立式复合板生产线，设备占地面积小，产品一次成型40块，产量高。
主机配有行走系统，设备运转更简单快捷，大型固定式搅拌设备，搅拌料将更均匀，浇注效率更高。
2.设备优点：产量大，设备投资低，设备的厚度可以调，但是长度不能调 缺点：浇筑密实度不好，劳动强度大，需要人工开合模和脱模，只能做带面板的墙板1. Equipment performance：TF-01 type vertical EPS cement wall panel production line, the equipment occupies small area, the output of each mold is high, which can form 40 panels at one time. The mold is equipped with walking system so as to run more simple and fast, and with large stationary mixing equipment, which makes the slurry of mixing more uniform and pouring more efficient.2. Equipment advantages: high capacity, low investment, the thickness of panels can be adjusted, but length can’t be adjusted;The disadvantages: the casting compactness is bad, high intensity of labor, need manual to open and close the mold and demold, and only can produce panels with face boards.2、TFYZ-16立式翻转复合墙板成型机2. TYFZ-16 vertical rotating EPS cement wall panel production line1.设备性能；该模具为立式旋转卧式出板，墙板成型机一次可生产40块，该生产线主要分为： 配料搅拌系统、墙板成型系统、液压整体开模系统、液压翻转系统、整体出板翻转码垛系统、成型机自动循环系统、变频摆渡系统、数控配电系统等部件组成。
该生产线自动化程度高，液压开合模，解决了传统历史复合墙板机人工开合安全隐患，提高了工作效率。
设备配有整体出板码垛系统，解决传统的人工出板方式，减少产品的破损率，提高了产能。
生产线使用密封式泵送系统配备双工位注浆枪，注浆速度快密实度高，材料粘结更紧密2.设备优点：产量高，自动化程度高，实现了自动化脱模和开合模，省人工，设备的厚度可以调，但是长度不能调 缺点：只能生产带面板的墙板1. Equipment performance:The mold adopts the type with vertical rotating and demolding in horizontal, each mold can form 40 panels at one time, this production line is mainly divided into: batching and mixing system, wall panel molding system, overall hydraulic mold opening system, hydraulic turning system, overall panels pulling and stacking system, automatic mold circulating system, frequency conversion ferry system, numerical control power distribution system and other parts. This product line has high automation, with hydraulic mold opening and closing, which solves the traditional hidden danger that molds with manual demolding, improves work efficiency. The equipment is equipped with overall panels pulling and stacking system to solve the traditional method of manual demolding, which reduces the damage rate of the products and increasing the production capacity. The production line USES the sealed pumping system equipped with double stations of grouting gun, the grouting speed is fast and the density is high, the slurry bonds the cement boards more tightly.2. Equipment advantages:High capacity, high degree of automation, automatic demolding and mold opening and closing, save labor, the thickness of the mold can be adjusted, but length can’t:Disadvantages: this line only can produce panels with face boards3. TYF-16型卧式复合墙板生产线3. TYF-16 type horizontal EPS cement wall panel production line1.设备性能:自主研发的大型搅拌设备配有精确地自动配料系统，上料精确并结合材料的性能使料将搅拌更均匀，能够很好的融合在一起。
料浆泵送系统将搅拌好的料浆输送至设备里面，浇注模式简单方便，泵送浇注模式料浆更均匀，使料浆和面板粘结更紧密。
2.设备优缺点；模具带有液压开合模，自动化程度高，可生产不同的墙板，空心板，夹芯板，带面板和不带面板的墙板都可以做，设备的厚度和长度都可以调； 缺点：产量低，单个模具一次只能出10块板1. Equipment performance:The large mixing equipment is developed by us independently, which is equipped with accurate automatic batching system. The pouring pump fills the slurry into the mold, the pouring mode is simple and convenient, which makes the slurry more uniform, and the slurry bonds the cement board more tightly.2. Advantages of equipment:The mold with hydraulic mold opening and closing, with high degree of automation, which can produces different kinds of wall panel, such as hollow panel, sandwich panel, solid panel with or without face boards , thickness and length of mold can be adjusted;Disadvantages: low capacity, only forms 10 panels at one time4、TYF-18型卧式复合墙板（贵州的设备图片）4. TYF-18 type horizontal EPS cement wall panel production line1.设备性能:该生产线分为自动配料系统、搅拌系统、发泡系统、数控配电系统、墙板成型系统、料浆泵送系统、EPS预发系统、液压循环系统、整体出板系统.2.设备优缺点: 液压开合模，单个模具一次性可成型20块，长度和厚度可调，可生产带面板和不带面板的墙板 缺点：设备投资大些1. Equipment performance:The product line is divided into automatic batching system, mixing system, foaming system, CNC distribution system, wall panel molding system, slurry pumping system, EPS expanding system, hydraulic circulation system, overall panels demolding system.2. Advantages of equipment: Hydraulic mold opening and closing system, each mold form 20 panels at one time, can produce panel with or without face boards, length and thickness can be adjustedThe disadvantages: the equipment investment is bigger.